This automatic optical Fiber tensile testing system is designed for operator skill independent use in creation and laboratory configurations. Two fundamental design configurations enable the user to select between a set up for regular linear Proof testing and with additional mandrels for rotary high strength testing.
The linear edition is designed for production Proof testing with forces up to 22 N. Motorized clamps with very carefully designed rubberized inserts be sure that the Optical Fiber Proof-Testing Machine is not really ruined in the screening process while concurrently getting rid of the requirement for an outside air supply. Degrees of pulling force, pulling speed and hold time are programmable and easily accessible to the owner from the built-in LCD touch-screen control. Data from assessments can be stored and reached using the Universal serial bus dock or Ethernet user interface.
Mandrels of the identical style as with NYFORS’ visual Fiber recoaters can be installed on the Proof tester in the rotary higher strength configuration. The Fiber is wrapped round the two mandrels which assistance it having a unique clamping mechanism. In this way greater loads can be employed onto the Fiber, allowing breaking strength tests under controlled circumstances.
Changeable clamp positioning facilitates screening with the greatest force levels as well as screening of brief Fiber measures. The compact and light weight design makes the tool simple to move around in a laboratory atmosphere and also to incorporate in a production work table in which space reaches a premium. The machine is actually a compact and lightweight instrument perfect for screening the strength of optical fibers up to 30 N. The device is designed to fulfill all kinds of programs where a power test has to be performed.
The machine is designed with all the consumer in mind. The Optical Fiber Ribbon Machine is easily put into the guided linear clamps, and also the screening begins instantly using a “One Touch” go switch. The built-in microprocessor controls all of the important guidelines including pulling force, tugging speed and hold time. This allows for any totally controlled check each time.
The machine can be linked to an outside PC, which allows usage of all programmable parameters and settings. The machine is tailored to stand-on your own use or the incorporation into various subsystems. The machine has an extensive capability of signing and conserving details like pulling force, tugging velocity and Fiber diameter along with other guidelines.
Two recoat injector designs are available. The PTR307 utilizes an automated water pump to inject the recoat materials. The amount of materials dispensed from the automatic injector is controlled by hand through the top-mounted “Inject” switch or programmed into the machine utilizing the tablet control. The PTR307B comes with a handbook recoat injection program that requires an individual to manually dispense the recoat material into the mold cavity; a replacement injector for the PTR307B recoater is accessible below. Make sure you note that the automatic injector is only compatible with higher-directory recoat materials, whilst the handbook injector works with each low- and high- index recoat material; they are both sold individually listed below. Please contact Tech Support to learn more.
he handbook injector can be mounted to compatible Fiber recoaters using the 4-40 anchoring screws on the recoater real estate (see photo to the right). Utilize a 3/32″ hex key to secure the injector prior to use. To get in touch the PTRRRM to the recoater mold, tighten up the connector at the conclusion of the green plastic material tubing, then loosen by way of a 1/4 choose enable rotation.
The injector comes with a distribution device and 2-position choice handle for directing the stream of recoat material. A knurled dispensing attach with the inner plunger works as a syringe for that recoat material. To fill up the syringe, point the handle downward (i.e., toward the recoat bottle), then rotate the knurled dispensing screw counterclockwise till it rotates freely to fill the syringe (shown within the photo to the right). Then, to inject the recoat material to the mold, point the lever horizontally (i.e., dealing with qyjflh knurled screw) and spin the screw clockwise until close to the finish from the travel range is reached. Steer clear of bottoming out your dispenser because this may harm the interior plunger; also be mindful when re-interesting the threads in order to avoid cross threading the dispensing screw. A number of fill up/inject steps may be needed till air is displaced in the program. Use lens cells as well as an acetone or alcohol cleaning solution to accumulate SZ Stranding Line material that runs through the mold.